Factory Custom Luxury Cosmetic Perfume Packaging Boxes Sponge Lining
Rigid cosmetic and perfume boxes with CNC-cut sponge lining. Professional custom packaging for brands seeking reliable, scalable wholesale custom packaging.
View product
Perfume houses that want precise lid fit and a responsible material story start with this handmade square rigid perfume box, built from biodegradable recycled paper laminated over rigid cardboard, and the same lid-and-base construction scales from a single press kit to a full retail program when you spec a luxury perfume packaging box with custom CMYK printing, embossing, hot stamping, or matte lamination.
Fragrance buyers normally settle the format before the material. Keeping that decision explicit is what makes the rest of the specification — cavity size, board thickness, insert and finish — build on the right structure instead of being re-cut later.
| Format | How it opens | Fits when | Watch-outs |
|---|---|---|---|
| Square rigid lid–base (this product) | Lid lifts off the base on a fitted, secure friction closure | You want a square footprint, hand-finished edges and a controlled opening feel | Size and board thickness are CUSTOM, so both must be fixed before tooling |
| Rigid drawer or sleeve | Tray slides out of the sleeve | The bottle is presented on a tray, or the pack doubles as display | Adds a moving part; usually needs a ribbon pull or thumb notch |
| Magnetic flip lid | Lid hinges open on hidden magnets | The pack is opened repeatedly at a counter or in retail | Magnets change the recycling story and add cost per unit |
| Paper tube | Cap or plug lifts off a cylinder | The primary pack is cylindrical or very tall and slim | No square footprint; the wrap seam stays visible |
| Folding carton | Tuck flap | High-volume programmes where cost outranks rigidity | Lower compression resistance and no premium lid fit |
Rows 2–5 are general format guidance. Everything claimed for this product is limited to what the product page publishes: a two-piece lid–base build with a fitted secure friction closure, handmade construction with hand-finished edges, and a square rigid geometry that balances compression resistance with a controlled opening force.
The square footprint matters, the bottle needs a firm hold, and the unboxing gesture should feel deliberate rather than mechanical.
The pack is reopened at a counter, or the tray itself is part of the display and has to slide out cleanly.
The primary pack is round and you want the secondary pack to echo that shape rather than fight it.
The outer square is a design choice; the interior cavity is arithmetic. Work the chain below in order and the dieline you send for sampling already carries the numbers the factory needs.
| Step | What you write down | Illustrative arithmetic (example only — not a product specification) |
|---|---|---|
| 1 | Bottle width | Measure once with the cap on and record it with the unit (mm) |
| 2 | Insert allowance each side | Interior width ≈ bottle width + 2 × insert allowance |
| 3 | Board thickness | Outer width ≈ interior width + 2 × (board + wrap) |
| 4 | Lid clearance | Lid interior ≈ base outer width + clearance you can live with |
| 5 | Dieline note | Send the three numbers above with the artwork; they set the die, not the other way round |
The table shows the arithmetic form only — it carries no product dimensions, and the product page publishes size and thickness as CUSTOM. For a longer walk-through of this chain, see How Custom Perfume Box Manufacturers Plan Square Rigid Box Sizes.
The construction is a stack, and each layer is doing one job: carrying print, holding shape, finishing the edge, or locating the bottle.
Biodegradable recycled paper takes the CMYK artwork. This is the surface your brand colour and any embossing or foil sits on.
The rigid board underneath supplies the shape and the compression resistance that makes a square rigid box feel solid in the hand.
Handmade construction with hand-finished edges keeps lid and base aligned and wraps the exposed board edge cleanly.
Inserts and wraps are planned within the dieline, so the bottle is located before the board is cut rather than after.
| Layer | Supplies | Confirm with the supplier |
|---|---|---|
| Recycled paper wrap | Print surface, texture, finish compatibility | How the chosen finish behaves on recycled stock |
| Rigid cardboard core | Shape, rigidity, lid fit | Thickness (CUSTOM) against your cavity |
| Hand-finished edges | Alignment, edge wrapping, hand-feel | Which panels are wrapped and how the corners are turned |
| Insert or wrap | Bottle location, protection in transit | Whether the insert is part of the dieline or a separate piece |
The product page does not publish board grades, recycled content percentages or compostability certificates. Ask for those in writing before a programme is approved. More on pairing surfaces and cores: How to Match Recycled Paper and Greyboard in Perfume Boxes.
“Secure but premium” is not a mood — it is a set of decisions about the lid wall, the wrap and the clearance you are willing to hold in production.
A fitted, secure friction closure holds the lid without a magnet or a latch, so the pack opens the same way every time.
Handmade construction with hand-finished edges keeps lid and base aligned and stops the board edge showing.
Square rigid geometry balances compression resistance with controlled opening force — firm to lift, never a fight.
| What to write in the RFQ | What it means on the line |
|---|---|
| Secure friction closure, lid and base | The lid holds by fit; no magnet, no ribbon and no extra component to assemble |
| Hand-finished edges | Edge wrap and alignment are done by hand, so corner turning has to be agreed before production |
| Controlled opening force | Lid wall, wrap thickness and clearance are set together; changing one after sampling changes the feel |
| Assembles without tools | Folding and closing need no tooling at fulfilment, which keeps packing labour minutes down |
No friction-force figures, board grades or wall thicknesses are published for this product, so agree a sample and judge the opening by hand before bulk. Texture close-ups and colour can be checked against the supplied sample too.
The print method is CMYK across the wrap, and the premium finishes are added on top. Each one changes the dieline, so they are confirmed before sampling rather than after.
| Finish | What it adds | Where it works best | Confirm before sampling |
|---|---|---|---|
| CMYK printing | Full-colour artwork on the recycled paper wrap | Brand colour and photography across the lid and base | Colour target and how it reads on recycled stock |
| Embossing | Raised, tactile logo or pattern on the surface | A quiet logo treatment on a matte panel | Die position and whether the panel is single or double layer |
| Hot stamping | Metallic foil highlight | Limited editions, gift sets and retail display | Foil colour and how it holds on the wrapped edge |
| Matte lamination | Matte surface stated to improve scuff resistance and fingerprint control | Handled packs, sample kits and travel retail | Whether lamination covers the whole wrap or panels only |
Two lead times are published for this box, and both start from an approval rather than an enquiry — so the fastest route is to freeze the specification in one pass.
Cavity, board thickness, insert, finish list and panel positions are agreed and sent together with the artwork.
The sample is where lid fit, opening force, edge wrap and finish are judged by hand before anything is committed.
Bulk production runs 15–25 days after approvals, and changes after that point restart part of the process.
| Freeze before sampling | Why it matters later |
|---|---|
| Bottle dimensions with the cap fitted | They set the interior cavity and the outer square |
| Insert type and thickness | The insert is planned inside the dieline, so a late change re-cuts the die |
| Board thickness (CUSTOM) | Thickness drives both rigidity and the opening feel |
| Finish list and panels | Embossing and hot stamping each need their own die position |
| Quantity and delivery destination | Price starts from $1.86 per unit and varies with specification and volume |
MOQ, carton data and any certification documents are not published on the product page — request them with the quote so nothing is assumed.
Everything below is taken from the product page. Anything the page does not publish is marked as such instead of being filled in.
| Item | Listed value |
|---|---|
| Product number | 1601669214326 |
| Price | From $1.86 per unit, varies by specification and volume |
| Size | CUSTOM |
| Thickness | CUSTOM |
| Colour | CMYK |
| Printing | CMYK |
| Materials | Biodegradable recycled paper laminated over rigid cardboard |
| Closure | Fitted lid and base, secure friction closure |
| Optional finishes | Embossing, hot stamping, matte lamination |
| Sample lead time | About 7 days |
| Bulk lead time | 15–25 days after approvals |
| MOQ and certification | Not published on the product page — confirm with the supplier |
Keep adjacent product options together for a faster catalog comparison.
Rigid cosmetic and perfume boxes with CNC-cut sponge lining. Professional custom packaging for brands seeking reliable, scalable wholesale custom packaging.
View product
Source sustainable, premium wholesale custom packaging for chocolate brands. Featuring a secure lid and base design, our eco-friendly custom packaging offers customizable dimensions and finishes to…
View product
Professional-grade luxury cosmetics shopping bags with premium ribbon handles. Custom CMYK offset printing paper bags tailored for bulk retail branding.
View productreview the product details, images, and specifications presented on the official product page.
use the application and use-case information published on the official product page.
confirm the specifications and options listed for the exact product variant before placing an order.
check the official product page or ask the supplier about options shown for the selected product.
use the official contact or inquiry path provided on the site.
include the product page, intended use, required quantity, and any specifications you need the supplier to review.
